Clear Flow 48 is ideal for coating all types of surfaces such as canvas, tabletops & counters. It also works well for small castings. It cures clear and can be poured in layers of 5mm thick!
Mixing Ratio: 100:25
For every 100g of ( A ) Resin used you will need 25g of ( B ) Hardener
NOTE: The mixing ratio must be accurately followed. It is not possible to change the mixing ratio, This would result in lower mechanical properties and the resin not drying correctly.
The mixture should be thoroughly stirred (mix for 3-4 mins) to ensure full homogeneity. Epoxy system tend to heat up much faster in a pot than as a film/coating. Therefore mix only the necessary amount usable within the given pot life.
It is very important that your resin is at room temperature “aprox:18°- 20°” prior to pouring and during its complete drying process, if needed sit container ( A ) Resin in hot water for 5 mins or so until the viscosity of the resin has a nice fluid movement.
Pot Life: 40 mins Touch Dry: Aprox 12-18 hrs Demoulding: Aprox 24 hrs
Fully Cured: Aprox 48 hrs Heat Resistance: Aprox 90°-95°
Applyable Surfaces: Wood, Metal, Glass, Concrete, Canvas, Plastic