Clear Flow 24h – Fast Set Epoxy

Description

Clear Flow 24 Epoxy Is Commonly Used As A Durable Finish On All Types Of Tabletops & Counters.

It is Also Great For Large Pours In River-Tables, Flooring And for Embedded Castings.

Mixing Ratio:  100:40 

For every 100g of ( A ) Resin used you will need 40g of ( B ) Hardener

NOTE: The mixing ratio must be accurately followed. It is not possible to change the mixing ratio, This would result in lower mechanical properties and the resin not drying correctly.

The mixture should be thoroughly stirred (mix for 3-4 mins) to ensure full homogeneity. Epoxy system tend to heat up much faster in a pot than as a film/coating. Therefore mix only the necessary amount usable within the given pot life.

It is very important that your resin is at  room temperature “aprox:18°- 20°” prior to pouring and during its complete drying process, if needed sit container ( A ) Resin in hot water for 5 mins or so until  the viscosity of the resin has a nice fluid movement.

Working Time: Aprox 1 hrs                      Touch Dry: Aprox 12-18 hrs                       Demoulding: Aprox 24 hrs

Fully Cured: Aprox  24-48 hrs                     Heat Resistance: Aprox 90°-95°           Pour Depth:: Aprox 50mm

Applyable Surfaces: Wood, Metal, Glass, Concrete, Canvas, Plastic