46 Western Parkway Business Park,
Lower Ballymount Road,
Dublin 12, Ireland.
Eircode: D12 VK61

Mon – Thur: 9:00am – 5.30pm
Fri: 9:00am – 5.00pm
Closed for lunch: 1.00 - 2.00pm

Acrylic One - 7.5kg Starter Pack+Extras

SKU A1-EXT Category

This kit contains 7.5 kg A1 and the most popular additives and fillers. You will find that it has everything you need to extensively explore the possibilities that A1 has to offer.

The A1 Start kit Extended contains a selection of the most popular additives and fillers, which enables you to extensively explore the possibilities of A1 yourself.

The Extended A1 Starter kit contains:

  • 2.5 kg A1 Liquid
  • 5 kg A1 Powder
  • 3 m2 A1 Triaxial fibre
  • 0.25 kg A1 Retarder
  • 0.25 kg A1 Thix A
  • 0.25 kg A1 Sealer
  • 0.25 kg Iron powder
  • 0.25 kg Black pigment
  • 1 kg A1 ATP Powder for an optimal A1 thickening result
  • 30 mm High Shear Mixer for the best mixing result
  • 1 kg Filler Sand
  • 1 m2 C-veil


Out of stock


A1, the abbreviation for Acrylic One, is a two-component material consisting of a mineral powder and a water-based acrylic resin. These bind in such a way that a very strong material is created. A1 has many unique properties. These contribute to its strength, durability, weight to strength ratio, non-toxic, easy to manufacture and its ability to comply with many of the necessary test requirements of the construction industry, specifically those in regard to performance to fire and performance under impact.

A1 has low toxicity both in its component parts and in its manufacturing process. Its potential use is wide-ranging and could effectively replace much GRG, GRC and GRP in many of the situations where those materials are now used, both in- and outdoor. In comparison with GRC, A1 offers much greater versatility, as a panellised cladding system in that the manufacturing tolerance can be much tighter. A1 possesses a high resistance to ultraviolet degradation. It can, therefore, be used in a situation where other materials would suffer.

Main application areas
• Cladding & Façade
• Art & Sculpture
• Theming & Decoration

• Very high fire resistance properties
• UV stabilised
• Rainwater resistant (if sealed)
• Good mechanical properties
• Low heat generation (max 45 °C)
• Shrink free
• Solvent-free
• Environmentally friendly
A1 can be moulded, laminated, applied with spatula, brush or roller. These techniques can be used in combination and can be applied in a mould or on an object.

A1 Manual_Engels_okt19

Additional information

Weight 10 kg


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Acrylic One Maunal


Epoxy Resin Calculator