Milliput – 2 Part Epoxy Putty

Each grade is presented in similar packs containing 2 x 56·7gm. sticks and the general instructions for preparation and usage are the same.

The two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25ºC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes.

After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process).

Shelf Life: We recommend Milliput is stored in cool, dry conditions. Please reseal bags after use. Stored correctly this product should remain workable for about 2 years.

Standard Yellow-Grey: The epoxy putty with a thousand uses in modelling D.I.Y and industry.

Superfine White: For the restoration of porcelain and other ceramics for the repair of antiques, objects d’art, Victorian dolls, picture mouldings, etc. For sculpting and modelling. For the repair of white domestic chinaware and for filling scores and dents in white domestic equipment e.g. washing machines, refrigerators, etc.

Terracotta: For the restoration of terracotta and other ceramics. Also for the repair of garden urns, pots, statuettes and damaged brickwork, etc. Also for sculpting and modelling.

Silver Grey: Silver Grey was introduced as a slightly finer filler and is widely used for modelmaking examples for use Military modelling, Doll’s hospital, Porcelain restoration, Domestic repairs, taxidermy
and for the repair of garden ornaments.

Black : For the repair of guttering, ebonised wood, marble, slate, cast iron and black plastic parts.